Search results

Have a Bugeye H Prod car that moves almost violently left to right under braking. The harder the braking the more violent the movement left to right. It was unsafe at Grattan. Toe is set at zero, uses the common big brake kit (MGB calipers, Spitfire rotors etc); uses Tilton 0.625 bore front M/C...

Has anyone heard of SRP calipers? There is a pair on the rear of the Bugeye with disc brake conversion that will be my HProd car. Has bleeders on both sides with a cross over fluid pipe underneath (should have taken a picture - arrrgh). Cute little brake pads. No number or other identification...

Be scared...be very scared...and yes, I don't know how to upload JPEG files. Arrrgh!

When can one expect registration to open for a Majors Tour event? Two months before? One month before? Thanks

Need to buy a canopy, there was some discussions on this a while back but no joy from the search function, probably a 10x10 or a touch bigger. EZ UP offers an 8x12 that would seem to be a perfect size. Car is a Spridget and usually it will be a one man show opening it up and taking it down...

What car - pit radio systems have you found reliable and easy to use? Biggest track would be Road America. Info as to specs on the system would be helpful. Thanks.

Can anyone point me to a write up on removing the camshaft from a 1275 engine while the engine is in the car? I saw it last night but now I can't find it. Has anyone tried this? The author used magnets to hold up the tappets while the cam was removed. Thoughts? Thanks EZ

Saw the double regional at Nelson for this weekend was cancelled. Any reason why? Thanks EZ

Finally had it out and running and stopping (very happy about that). Now to a race track...

And now we're faced with the reality of getting it on track.

On a MG Midget with a limited prep 1275 engine, Close ratio gear box what would be the suggested rear end ratio to use at say Mid Ohio and or Grattan? Thanks!

Was looking for an HP car to go with my vintage race and found this one less than a half mile from where I live. Will hopefully get it out of the trailer and in the shop next week. This is a picture taken about ten years ago. It's an early Rick Haynes chassis.

Question as to flywheel material: the GCR speaks to diameter but not material. This has probably been answered before so mea culpa - but on a LP 1275 can I use an aluminum flywheel? Thanks 4. Any flywheel of stock diameter or larger can be used, provided it attaches to the standard or...

Are the connecting rods used in a Mini Cooper 1275GT engine usable/the same as in a MG Spridget 1275 engine? Thanks

We're racing at Mid-Ohio this weekend: car darts or hunts under heavy breaking. Brake M/C and calipers are new, brake pads (Hawk black) are not. We're running 1/16 static toe out. This is the stock MG Midget brake setup. Any thoughts? Thanks EZ

We're thinking about building a LP MGB race car...poor mental health care will do that...the issue is how to install/mount a moveable seat to accommodate drivers of two different heights (74" to 66"). Has anyone faced this type of issue? Any clever solutions? Pictures? Thanks EZ

Going to try a club race at Waterford with my vintage Spridget. Car has a healthy 1275 with the open exhaust exiting out the driver's right just before the rear wheel under the car (not thru the tranny tunnel - maybe next year). As I understand it the sound meter is on driver's left down the...

Has anyone used a Bearing Buddy product or EZ Lube product for keeping grease in the axle hubs? There seems to be mixed comments on only using those on boat trailers where the axle might be submerged. Any thoughts/experiences? Thanks EZ

In a moment of insanity thanks in large part to Dayle Frame's rebuild of his Team Turtle car, I have decided to embarke on a rebuild of my vintage racer aka Midge 2.0. Here is the immediate question: what do I paint/prime the tub with (nice rust free tub from Texas, RWA MG Midget) when it comes...

Has anybody had any experience with an off the self wiring harness like Painless Wiring (pn 50001) for example or EZ Wiring? What did you use, was it any good, suggestions? Thanks ez