craig chima
Well-known member
Been doing some more garage clean out and have the following for sale:
TWO 13" x 5" Minator wheels for Sprite/Midget. Excellent condition and these wheels will fit under stock profile fenders so perfect for a vintage race application. I always had these two wheels mounted with decent "take off" race tires and kept them in the trailer in case of emergency on race weekends (puncture, flat spotted tire, etc) where there were no tire vendors at the event. Cheap insurance! $100 each or $160 for the pair
4.22 Differential stuff:
Complete stock 4.22 $200
Disassembled but otherwise complete 4.22. $150 (includes case, carrier, bearings, flange, etc)
"Loose" CPW (ring and pinion) set. $125
3.9 Differential stuff:
Complete stock 3.9. $275
"Loose" CWP (ring and pinion) set $150
All gears are in excellent condition and suitable for race or street application.
1500 Ford Pre Crossflow cylinder heads:
TWO of the highly desiraable 116E "GH" casting heads. Bone stock and ready for porting, etc. The GH casting heads have the most material and can be milled and ported more aggressively than other castings. $300 each
Craig Chima, CC Motorsports, Akron, OH. PM me here or email [email protected] or (330) 807-0738 call or text
TWO 13" x 5" Minator wheels for Sprite/Midget. Excellent condition and these wheels will fit under stock profile fenders so perfect for a vintage race application. I always had these two wheels mounted with decent "take off" race tires and kept them in the trailer in case of emergency on race weekends (puncture, flat spotted tire, etc) where there were no tire vendors at the event. Cheap insurance! $100 each or $160 for the pair
4.22 Differential stuff:
Complete stock 4.22 $200
Disassembled but otherwise complete 4.22. $150 (includes case, carrier, bearings, flange, etc)
"Loose" CPW (ring and pinion) set. $125
3.9 Differential stuff:
Complete stock 3.9. $275
"Loose" CWP (ring and pinion) set $150
All gears are in excellent condition and suitable for race or street application.
1500 Ford Pre Crossflow cylinder heads:
TWO of the highly desiraable 116E "GH" casting heads. Bone stock and ready for porting, etc. The GH casting heads have the most material and can be milled and ported more aggressively than other castings. $300 each
Craig Chima, CC Motorsports, Akron, OH. PM me here or email [email protected] or (330) 807-0738 call or text