Recent content by markb

Any decision(s) made? http://cdn.growassets.net/user_files/sc ... 1434725484 CLUB RACING BOARD MINUTES | June 2, 2015 Member Advisory Prd 1. #15923 (Mike Ogren) Adjustment for DOT Tires Please The CRB appreciates all the comments on this issue. The question of allowing a weight reduction for...

Wanting to move the car home and out of the shop but it's the kind of neighborhood where you get a fine if you leave your trash can out an extra day and cars can not be parked in the driveway. Oh, and there's the golfers. No solid answers from Google other than a bunch of "might" work things...

Bleeder screw stripped the threads in an aluminum front caliper so I swapped it with a rebuilt one from the auto parts store. The other front caliper is a rebuilt unit with about 50 races or so on it and 5 years old (same as the one that was replaced). Should I replace the other front as well or...

I need 4 of these in 5/8" but do not know what they are called and am having no luck with Google. I bought the threaded rod end at the local circle track shop but they don't have the center piece I need. It's a right hand and left hand threaded rod with a nut in the middle. What's the proper...

Looking for a 13b EP motor. No street motors or other high mileage stuff. Prefer short block only but will consider long block. Am open to doing a refresh if motor was originally built from new housings, irons, etc. Please PM your contact information. Thanks Mark

I've always had my tires balanced and put tape on the weights. I've also marked my tires before and noticed that they spin on the rims from the mounting lubricant. Given that they move on the rim is there any point in balancing? Seems to me like that is just a wasted step and a PITA cleaning...

Longacre Ignition switch panel with aux switch Longacre ignition switch panel with start button and aux switch. Wire leads and disconnect plug included. $25 + shipping Pictures: http://imageshack.us/g/829/img20120805145837.jpg/ Custom aluminum air box for 2nd Gen RX-7 Custom aluminum...

Hoosier 23x8.0x15 Bias Ply Slicks – Huge Assortment Too many tires, need to clear them out and no longer using this size. All purchased in the past 3-36 months. Normal tire cycle for me was a double National weekend on stickers which became the test set for the following race weekends Friday...

Building a new stainless exhaust system and was going to use v-band clamps after the header and before the muffler for easy removal. I am noticing big price differences from about $22 to $100 each (with 2 flanges) delivered on 304. Is there a big quality difference on these when they both are 304?

I can't find anything using Google. Looking for any feedback/opinions on the DM10 please. I have a ChaseCam and am looking for data and don't need a dash. Seems like the most cost effective/simplest solution for my situation. Anyone tried the DM10 or know someone who did?