1999 SCCA E Production Mazda Miata For Sale - $39,000

Matt Reynolds

New member
This E Production (EP) Miata is a three-time SCCA EP National Championships winner with 5 Runoffs podiums. Additionally, it has won 2 SCCA Super Sweeps, is an eight-time SCCA EP National Points Champion, and currently holds 10 track records. The Miata is maintained and developed by Chris Campbell's Vintage Connection with Jesse Prather Motorsports (JPM) developing and preparing the motor. The car is completely refreshed annually prior to the SCCA Runoffs. We will be racing the Miata at Super Tours and Majors throughout the 2022 season. The price for the car and spares package is $39,000. Please DM me with any questions. I have more pictures but it would only allow me to upload 3. Thanks for looking!

A summary of the race package and spares:
Car Specs
- JPM motor (new for 2021 Runoffs) w/Crower billet crank, Carillo rods, JPM camshafts and pistons
- 3 stage dry sump oiling system, and JPM modified header
- EMCO 5 speed
- 6 EMCO drop gears cover virtually any track
- 4:10 differential with OS Giken
- Tubular suspension w/adjusted roll centers and spherical bearings
- Three-piece adjustable front sway bar
- Driveshaft Shop larger CV axle assemblies
- Powertrain 5.5" dual plate clutch and flywheel
- Tilton brake and clutch pedal assembly
- JPM AFCO shocks and upper mounts
- 8 Enkei RPF1 15"x7 wheels w/used 245/580-15 Hoosiers
- 4 Team Dynamics wheels 15/7 wheels with used H2o Hoosiers
- Two-piece stock dimension rotors
- Electromotive ignition system
- Innovate wide band 02 gauge
- Autometer gauges
- Springfield Dyno radiator
- Coast Fabrication re-packable mufflers
- Cool Suit system
- Fuelsafe cell with internal surge tank. External surge tank fed by Holley pump and Bosch high pressure pump supporting injectors
- Ultrashield containment road race seat
- Fiberglass fender flares and front bumper
- Traqmate GPS Data Acquisition System
Included Spares
- Pair of left and right modified rear carrier bearing assemblies
- New Driveshaft Shop CV axle assembly
- EMCO trans small bits, seals, bearing, shift fork, etc.
- Pair of prepped used front wheel bearings
- Front and rear two-piece brake rotors
- New brake and clutch master cylinders
- 4 pairs front and rear suspension springs
- New Holley low pressure and Bosch high pressure fuel pumps
- New Aeromotive fuel pressure regulator
- Throttle body with stronger shaft
- Electromotive coil pack, crank sensors, trigger wheels both new and used.
- 8 used Deatschwerks fuel injectors, cleaned and tested
- New fiberglass front and rear bumper
- New undertray
 
Back
Top