prodracing.com

Unofficial SCCA Production Racing Forum
It is currently Sat Nov 17, 2018 7:12 am

All times are UTC - 8 hours




Post new topic Reply to topic  [ 12 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Spridget Parts
PostPosted: Mon Oct 01, 2018 6:46 pm 
Offline
User avatar

Joined: Tue Nov 03, 2009 6:44 pm
Posts: 835
I am moving out of my NH home and have many years of collecting Spridget parts. The following parts will not be making the trip with me. Maybe you can use them. Otherwise they will be gone.

SPRIDGET PARTS
The following parts are available for the actual cost of shipping plus a $10 handling fee. All are used except as noted. Please act quickly as these are headed for the metal scrap yards.

Stock Rib Case Transmission parts: Input shafts,
Cams – (2) ½” lobe stock

Stock rockers – Sheet metal type


948 oil pans – one has a special dash 12 fitting and box section welded in to simulate dry sump. Another is a good pan with little to no rust.
Springs: (2) 350lbs x 2”, (2) 175 x 2 ¼ I.D.


Distributer drive spindles
Brake Drums (2)





Intake Manifold




The following parts are available for the prices shown plus actual shipping costs. Offers considered.


Stock 1275 EN16 Crank - $150

Rear end pumpkins – Runoffs winning 4:55 REM’d gears (beautiful piece) - $225,
welded 4:55 - $150

_________________
#4 HP Midget
HP National Champion


Last edited by Ron Bartell on Mon Oct 08, 2018 4:19 am, edited 7 times in total.

Top
 Profile  
 
 Post subject: Re: Spridget Parts
PostPosted: Mon Oct 01, 2018 7:22 pm 
Offline

Joined: Tue Nov 17, 2009 11:17 am
Posts: 180
PM sent


Top
 Profile  
 
 Post subject: Re: Spridget Parts
PostPosted: Tue Oct 02, 2018 3:44 am 
Offline

Joined: Wed Jul 06, 2011 3:48 am
Posts: 562
Location: Florida
PM sent.

Bob

_________________
Bob Hess 165947
HP 13 '59 AH Sprite FP
HP 49 '60 AH Sprite LP


Top
 Profile  
 
 Post subject: Re: Spridget Parts
PostPosted: Tue Oct 02, 2018 5:14 am 
Offline

Joined: Wed Dec 09, 2009 4:43 pm
Posts: 3
PM sent


Top
 Profile  
 
 Post subject: Re: Spridget Parts
PostPosted: Tue Oct 02, 2018 2:06 pm 
Offline
User avatar

Joined: Mon Aug 19, 2002 12:07 pm
Posts: 789
Location: Costa Mesa, CA
Ron,

I am interested in the 1275 pressure plate if it is in good condition and you still have it..

Gary

_________________
33 HP - Austin Healey Sprite - National License
Cal Club - Southern Pacific Division


Top
 Profile  
 
 Post subject: Re: Spridget Parts
PostPosted: Tue Oct 02, 2018 3:51 pm 
Offline
User avatar

Joined: Tue Nov 03, 2009 6:44 pm
Posts: 835
Gary Wittman wrote:
Ron,

I am interested in the 1275 pressure plate if it is in good condition and you still have it..

Gary
OK you've got it. I'll send you a PM with shipping info.

_________________
#4 HP Midget
HP National Champion


Top
 Profile  
 
 Post subject: Re: Spridget Parts
PostPosted: Mon Oct 08, 2018 4:20 am 
Offline
User avatar

Joined: Tue Nov 03, 2009 6:44 pm
Posts: 835
Many parts have been spoken for and some have already made their way to the metal recycler.

_________________
#4 HP Midget
HP National Champion


Top
 Profile  
 
 Post subject: Re: Spridget Parts
PostPosted: Mon Oct 08, 2018 6:40 am 
Offline

Joined: Sat Dec 12, 2009 8:08 am
Posts: 609
Location: Atlanta, Ga
Have you pick a new location to live?

South to NY, Va, NC, Ga or Fl?

_________________
Jim Creighton
CARS Tour DoR
SEDiv SARRC Administrator
V8 Road Racing Series Administrator
Runoffs Line Chief Tech Prod cars


Top
 Profile  
 
 Post subject: Re: Spridget Parts
PostPosted: Mon Oct 29, 2018 5:50 am 
Offline
User avatar

Joined: Tue Nov 03, 2009 6:44 pm
Posts: 835
FP Racer wrote:
Have you pick a new location to live?

South to NY, Va, NC, Ga or Fl?
Race car, trailer, and motorhome are all safely in Florida where I will be racing out of for the future. I am currently back in NH and still have a couple of loose ends on these parts:

I believe that someone was looking for some steering arms but I did not capture who that was. I still have a couple of these set aside if anyone is interested.

I still have two stock half-inch lobe cams in good condition. Doesn't anyone regrind these for a race cam anymore?

The springs: (2) 350lbs x 2”, (2) 175 x 2 ¼ I.D.

Also, I still have my runoffs 4.55 diff with REM'd gears for $225 OBRO

The rest is gone. Thank you all for finding homes for this stuff.

_________________
#4 HP Midget
HP National Champion


Top
 Profile  
 
 Post subject: Re: Spridget Parts
PostPosted: Wed Nov 07, 2018 11:38 am 
Offline

Joined: Sat Aug 28, 2010 3:54 am
Posts: 139
Ron, I'll take the camshafts if you still have them. My shipping zip code is 29691. Let me know the cost. Thanks, John


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ]  Go to page 1, 2  Next

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group