Longacre Ignition switch panel with aux switch
Longacre ignition switch panel with start button and aux switch. Wire leads and disconnect plug included. $25 + shipping
Pictures: http://imageshack.us/g/829/img20120805145837.jpg/
Custom aluminum air box for 2nd Gen RX-7
Custom aluminum cold air intake box with new K&N filter. Fits 2nd Gen RX-7 right headlamp area. For racing purposes only. Similar in design to AWR air box.
$100 + shipping
Pictures: http://imageshack.us/g/38/pict0127m.jpg/
2nd Gen RX-7 Speed Bleeders
Complete set for 2nd Gen RX-7 with 4 pot calipers on front and vented rotors rear. Includes a speed bleeder for the clutch slave cylinder as well. Have the original receipt from Speed Bleeders if you need it.
$30 shipped.
Pictures: http://imageshack.us/g/215/img20120805145415.jpg/
Racing Beat 2nd Gen RX-7 NA flywheel + extras
Racing beat aluminum flywheel for NA RX-7 1983-1992 13b. Purchased new and used on a road race car only. Includes flywheel to pressure plate bolts. No counter weight included.
Extra used friction plate included. Current friction plate has 30 minutes of use as that is how long the clutch disc from ClutchNet lasted before it was down to the rivets. Friction plate does have some wear from short life of last clutch disc. Includes Racing Beat/Exedy race pressure plate also with 30 minutes of use but shows signs of wear from short lived ClutchNet disc. Good condition and useable 4 puck clutch disc from Mazdaspeed and unknown pressure plate.
No longer using stock type components and have moved on to a Quartermaster 7.25” clutch and flywheel and Dodge splined Jerico.
Selling entire clutch/flywheel components as one lot for $250 + shipping.
Pictures: http://imageshack.us/g/801/img20120805150925.jpg/
Longacre ignition switch panel with start button and aux switch. Wire leads and disconnect plug included. $25 + shipping
Pictures: http://imageshack.us/g/829/img20120805145837.jpg/
Custom aluminum air box for 2nd Gen RX-7
Custom aluminum cold air intake box with new K&N filter. Fits 2nd Gen RX-7 right headlamp area. For racing purposes only. Similar in design to AWR air box.
$100 + shipping
Pictures: http://imageshack.us/g/38/pict0127m.jpg/
2nd Gen RX-7 Speed Bleeders
Complete set for 2nd Gen RX-7 with 4 pot calipers on front and vented rotors rear. Includes a speed bleeder for the clutch slave cylinder as well. Have the original receipt from Speed Bleeders if you need it.
$30 shipped.
Pictures: http://imageshack.us/g/215/img20120805145415.jpg/
Racing Beat 2nd Gen RX-7 NA flywheel + extras
Racing beat aluminum flywheel for NA RX-7 1983-1992 13b. Purchased new and used on a road race car only. Includes flywheel to pressure plate bolts. No counter weight included.
Extra used friction plate included. Current friction plate has 30 minutes of use as that is how long the clutch disc from ClutchNet lasted before it was down to the rivets. Friction plate does have some wear from short life of last clutch disc. Includes Racing Beat/Exedy race pressure plate also with 30 minutes of use but shows signs of wear from short lived ClutchNet disc. Good condition and useable 4 puck clutch disc from Mazdaspeed and unknown pressure plate.
No longer using stock type components and have moved on to a Quartermaster 7.25” clutch and flywheel and Dodge splined Jerico.
Selling entire clutch/flywheel components as one lot for $250 + shipping.
Pictures: http://imageshack.us/g/801/img20120805150925.jpg/