I need a set of alunumim front hubs that would fit the Only 7's set up - I acquired the front rotors and calipers but need the hub that will fit the Mazda strut
Nascar style ducted oil cooler with 2 speed heavy duty fan. Cooler is 11 row Setrab w/ AN8 fittings- could be used as supplemental engine but best use would be trans or diff application. You would need to fabricate the duct to fit the housing- 11" long, 7" high $100
Nascar style cooling fan for transmission or diff- set up to have a cooler mounted to it- approx 11" X 5" X 6"; heavy duty 2 speed fan
$60 shipped in the lower 48
2 sets Hoosier 245/580 15" R-80 compound- 12 heat cycles- good for test/tune/track day/solo
$100 per set of 4 or $150 for both sets- I will be at Daytona regional 8/10 and Barber 9/1 if you wanted to save freight charges
I changed from the bias to radial this year- First Gen RX7; any input as to the spring rates and/or camber- Hoosier recommended 3 1/2 negative on front but we found 2 1/2 to work for our car better- we are still running the 400 springs on the rear but it makes the car rotate pretty quickly...